01444 247360
Legno
Hardwood frames and external trim sections are integrated with an inner framework of steel studs and tracks to create a relocatable partitioning system that not only has the visual appeal provided by timber but flexibility and performance capability.
A non-loadbearing relocatable partitioning system, Legno is based on an inner framework of 50mm
thick (nominal) steel studs and tracks and solid hardwood trim sections, doorframes and window mullions.
Glazed modules may be single offset or double glazed and can be constructed in various elevations.
Blinds can be incorporated within double glazed modules.
Adjacent solid modules are constructed with either a single layer or double layer
of plasterboard panels 12.5mm thick fixed on each side of the steel inner framework with external solid
hardwood trim sections between vertical joints.
Features
- Modules solid or fully and/or partially glazed
- Single or double glazed modules
- Solid modules faced with vinyl, laminate, veneer or paint
- Timber skirtings and trims at vertical joints between modules
- Choice of cherry, ash, oak, beech and mapletimber from sustainable forests
- Tested fire resistance
Technical Specifications
Doors and Frames
Doors
Door frames and window mullions are solid hardwood. Doors of varying heights and widths can be accommodated..
Doors
Door frames and window mullions are solid hardwood. Doors of varying heights and widths can be accommodated..
Performance
Fire Resistance
Up to 60 minutes integrity and insulation (depending on construction)
in accordance with BS476 Part 22
Sound Resistance
Up to 44 dB Rw depending on construction
Fire Resistance
Up to 60 minutes integrity and insulation (depending on construction)
in accordance with BS476 Part 22
Sound Resistance
Up to 44 dB Rw depending on construction
Finishes
Panels
Available finishes include vinyl and fabric. Melamine, laminate or veneer is also available
but may require a panel type other than plasterboard
Hardwood Section
Cherry, Oak, Ash, Beech or Maple finished with two coats of satin lacquer (60% gloss) Other hardwoods can be supplied on request
Glass Type
6mm toughened, 6mm and 7mm fire rated and 6.4mm laminated (usage will depend on construction and performance level required)
Dimensions
Thickness
75mm (nominal) - 100mm over trim sections and 100mm (nominal) – 125mm over trim
sections
Maximum Height
Up to 3600mm
Module Width
Solid modules generally 1200mm wide
Panels
Available finishes include vinyl and fabric. Melamine, laminate or veneer is also available
but may require a panel type other than plasterboard
Hardwood Section
Cherry, Oak, Ash, Beech or Maple finished with two coats of satin lacquer (60% gloss) Other hardwoods can be supplied on request
Glass Type
6mm toughened, 6mm and 7mm fire rated and 6.4mm laminated (usage will depend on construction and performance level required)
Dimensions
Thickness
75mm (nominal) - 100mm over trim sections and 100mm (nominal) – 125mm over trim
sections
Maximum Height
Up to 3600mm
Module Width
Solid modules generally 1200mm wide
Copyright © 2006, Avanti Systems, All Rights Reserved